OUR SPECIALITIES
Discover What We Do
We build it, rework it, manufacture it and deploy the people to support it. Everything your hardware programme needs, when you need it.
PROTOTYPE
Prototype Electronics Builds
When you're moving fast, waiting weeks for a prototype isn't an option. We build rapid prototype electronics assemblies for robotics, EV, aerospace and advanced hardware teams - with turnaround times that match your development cycle.
PCB assembly and through-hole soldering
Rapid turnaround from 48 hours
Low minimum order quantities
Full functional testing before delivery
MANUFACTURING
Cable Harness Manufacturing
Precision wiring harnesses built to your exact specification. Whether you need a one-off prototype loom or low-volume production runs up to 1000+ units, we manufacture harnesses that meet the demands of high-performance hardware environments.
Custom harness design and build
Low-volume production runs up to 1000+ units
Suitable for robotics, EV, aerospace and defence
Full continuity and quality testing
PCB's
PCB Manufacture, Design & Rework
From fine pitch PCB assembly to fault diagnosis and rework, our engineers have the skills and equipment to support your hardware at every stage. We work with complex multilayer boards and tight tolerances that other suppliers turn away.
Fine pitch SMD assembly and soldering
PCB fault diagnosis and repair
Rework and modification of existing boards
BGA reballing and component replacement
TECHNICIANS
Elite Electronics Technicians, On Demand
Sometimes you need an expert in the room, not a delivery to the door. Our electronics technicians embed directly within your team on an ad-hoc or contract basis - bringing hands-on expertise to your facility exactly when your project demands it.
On-site technicians available UK, USA and Europe
Ad-hoc, short-term and long-term contracts
Experienced in robotics, EV, motorsport and defence
Rapid deployment - technicians available within days
INSTRUMENTATION
Instrumentation & Sensor Supply
We supply, install and integrate instrumentation components for hardware teams that need accurate, reliable data from their systems. From our own made in house thermocouples to custom sensor configurations, we source the right components and get them working in your application fast.
Thermocouple and temperature sensor supply
Data acquisition system setup and calibration
Custom sensor harness design and build
On-site instrumentation installation and commissioning
TESTING & VALIDATION
Electronics Testing & Validation
Before your hardware goes further, it needs to work - reliably, every time. We provide thorough electronics testing and validation services for assemblies at every stage of development, from early prototype through to pre-production sign-off.
Continuity and insulation resistance testing
Functional testing of PCBs & assemblies
Environmental and thermal testing support
Test report generation and documentation
REPAIR & DIAGNOSTICS
Electronics Repair & Fault Diagnosis
When something isn't working, you need answers fast. Our engineers diagnose and repair electronics assemblies across a wide range of complexity from simple component failures to intermittent faults on complex multilayer PCBs. We work quickly, document everything and get your hardware back in action.
Intermittent fault finding and root cause analysis
PCB fault diagnosis and component level repair
Rework and modification of existing assemblies
BGA reballing and fine pitch component replacement
Full repair reports and recommendations provided
REVERSE ENGINEERING
Reverse Engineering & Schematic Recreation
When original documentation doesn't exist or can't be sourced, we reverse engineer electronics assemblies to recreate schematics, identify components and understand how a system works. Useful for legacy hardware, obsolete assemblies or when you need to modify or replicate an existing design.
Component identification and BOM generation
Legacy hardware analysis and documentation
Design modification and improvement recommendations
Support for obsolete or unsupported assemblies
PCB schematic recreation from physical boards
THE PROCESS
Simple From Start to Finish
No lengthy onboarding, no complicated procurement. Just tell us what you need and we'll take it from there.
STEP 01
Request a Quote
Fill in our quick form and tell us what you're building. We'll respond within 24 hours.
STEP 02
We Scope Your Project
Our engineers review your requirements and confirm timelines, specs and pricing.
STEP 03
Fast Delivery
We build, test and deliver to your schedule, when and wherever it suits you. No surprises.
OUR SPECIALITIES
Discover What We Do
We build it, rework it, manufacture it and deploy the people to support it. Everything your hardware programme needs, when you need it.
PROTOTYPE
Prototype Electronics Builds
When you're moving fast, waiting weeks for a prototype isn't an option. We build rapid prototype electronics assemblies for robotics, EV, aerospace and advanced hardware teams - with turnaround times that match your development cycle.
PCB assembly and through-hole soldering
Rapid turnaround from 48 hours
Low minimum order quantities
Full functional testing before delivery
MANUFACTURING
Cable Harness Manufacturing
Precision wiring harnesses built to your exact specification. Whether you need a one-off prototype loom or low-volume production runs up to 1000+ units, we manufacture harnesses that meet the demands of high-performance hardware environments.
Custom harness design and build
Low-volume production runs up to 1000+ units
Suitable for robotics, EV, aerospace and defence
Full continuity and quality testing
PCB's
PCB Manufacture, Design & Rework
From fine pitch PCB assembly to fault diagnosis and rework, our engineers have the skills and equipment to support your hardware at every stage. We work with complex multilayer boards and tight tolerances that other suppliers turn away.
Fine pitch SMD assembly and soldering
PCB fault diagnosis and repair
Rework and modification of existing boards
BGA reballing and component replacement
TECHNICIANS
Elite Electronics Technicians, On Demand
Sometimes you need an expert in the room, not a delivery to the door. Our electronics technicians embed directly within your team on an ad-hoc or contract basis - bringing hands-on expertise to your facility exactly when your project demands it.
On-site technicians available UK, USA and Europe
Ad-hoc, short-term and long-term contracts
Experienced in robotics, EV, motorsport and defence
Rapid deployment - technicians available within days
INSTRUMENTATION
Instrumentation & Sensor Supply
We supply, install and integrate instrumentation components for hardware teams that need accurate, reliable data from their systems. From our own made in house thermocouples to custom sensor configurations, we source the right components and get them working in your application fast.
Thermocouple and temperature sensor supply
Data acquisition system setup and calibration
Custom sensor harness design and build
On-site instrumentation installation and commissioning
TESTING & VALIDATION
Electronics Testing & Validation
Before your hardware goes further, it needs to work - reliably, every time. We provide thorough electronics testing and validation services for assemblies at every stage of development, from early prototype through to pre-production sign-off.
Continuity and insulation resistance testing
Functional testing of PCBs & assemblies
Environmental and thermal testing support
Test report generation and documentation
REPAIR & DIAGNOSTICS
Electronics Repair & Fault Diagnosis
When something isn't working, you need answers fast. Our engineers diagnose and repair electronics assemblies across a wide range of complexity from simple component failures to intermittent faults on complex multilayer PCBs. We work quickly, document everything and get your hardware back in action.
Intermittent fault finding and root cause analysis
PCB fault diagnosis and component level repair
Rework and modification of existing assemblies
BGA reballing and fine pitch component replacement
Full repair reports and recommendations provided
REVERSE ENGINEERING
Reverse Engineering & Schematic Recreation
When original documentation doesn't exist or can't be sourced, we reverse engineer electronics assemblies to recreate schematics, identify components and understand how a system works. Useful for legacy hardware, obsolete assemblies or when you need to modify or replicate an existing design.
Component identification and BOM generation
Legacy hardware analysis and documentation
Design modification and improvement recommendations
Support for obsolete or unsupported assemblies
PCB schematic recreation from physical boards
THE PROCESS
Simple From Start to Finish
No lengthy onboarding, no complicated procurement. Just tell us what you need and we'll take it from there.
STEP 01
Request a Quote
Fill in our quick form and tell us what you're building. We'll respond within 24 hours.
STEP 02
We Scope Your Project
Our engineers review your requirements and confirm timelines, specs and pricing.
STEP 03
Fast Delivery
We build, test and deliver to your schedule, when and wherever it suits you. No surprises.
OUR SPECIALITIES
Discover What We Do
We build it, rework it, manufacture it and deploy the people to support it. Everything your hardware programme needs, when you need it.
PROTOTYPE
Prototype Electronics Builds
When you're moving fast, waiting weeks for a prototype isn't an option. We build rapid prototype electronics assemblies for robotics, EV, aerospace and advanced hardware teams - with turnaround times that match your development cycle.
• PCB assembly and through-hole soldering
• Rapid turnaround from 48 hours
• Low minimum order quantities
• Full functional testing before delivery
MANUFACTURING
Cable Harness Manufacturing
Precision wiring harnesses built to your exact specification. Whether you need a one-off prototype loom or low-volume production runs up to 1000+ units, we manufacture harnesses that meet the demands of high-performance hardware environments.
• Custom harness design and build
• Low-volume production runs up to 1000+ units
• Suitable for robotics, EV, aerospace and defence
• Full continuity and quality testing
PCB's
PCB Manufacture, Design & Rework
From fine pitch PCB assembly to fault diagnosis and rework, our engineers have the skills and equipment to support your hardware at every stage. We work with complex multilayer boards and tight tolerances that other suppliers turn away.
• Fine pitch SMD assembly and soldering
• PCB fault diagnosis and repair
• Rework and modification of existing boards
• BGA reballing and component replacement
TECHNICIANS
Elite Electronics Technicians, On Demand
Sometimes you need an expert in the room, not a delivery to the door. Our electronics technicians embed directly within your team on an ad-hoc or contract basis - bringing hands-on expertise to your facility exactly when your project demands it.
• On-site technicians available UK, USA and Europe
• Ad-hoc, short-term and long-term contracts
• Experienced in robotics, EV, motorsport and defence
• Rapid deployment - technicians available within days
INSTRUMENTATION
Instrumentation & Sensor Supply
We supply, install and integrate instrumentation components for hardware teams that need accurate, reliable data from their systems. From our own made in house thermocouples to custom sensor configurations, we source the right components and get them working in your application fast.
• Thermocouple and temperature sensor supply
• Data acquisition system setup and calibration
• Custom sensor harness design and build
• On-site instrumentation installation and commissioning
TESTING & VALIDATION
Electronics Testing & Validation
Before your hardware goes further, it needs to work - reliably, every time. We provide thorough electronics testing and validation services for assemblies at every stage of development, from early prototype through to pre-production sign-off.
• Continuity and insulation resistance testing
• Functional testing of PCBs & assemblies
• Environmental and thermal testing support
• Test report generation and documentation
REPAIR & DIAGNOSTICS
Electronics Repair & Fault Diagnosis
When something isn't working, you need answers fast. Our engineers diagnose and repair electronics assemblies across a wide range of complexity - from simple component failures to intermittent faults on complex multilayer PCBs. We work quickly, document everything and get your hardware back in action.
• Intermittent fault finding and root cause analysis
• PCB fault diagnosis and component level repair
• Rework and modification of existing assemblies
• BGA reballing and fine pitch component replacement
• Full repair reports and recommendations provided
REVERSE ENGINEERING
Reverse Engineering & Schematic Recreation
When original documentation doesn't exist or can't be sourced, we reverse engineer electronics assemblies to recreate schematics, identify components and understand how a system works. Useful for legacy hardware, obsolete assemblies or when you need to modify or replicate an existing design.
• Component identification and BOM generation
• Legacy hardware analysis and documentation
• Design modification and improvement recommendations
• Support for obsolete or unsupported assemblies
• PCB schematic recreation from physical boards
THE PROCESS
Simple From Start to Finish
No lengthy onboarding, no complicated procurement. Just tell us what you need and we'll take it from there.
STEP 01
Request a Quote
Fill in our quick form and tell us what you're building. We'll respond within 24 hours.
STEP 02
We Scope Your Project
Our engineers review your requirements and confirm timelines, specs and pricing.
STEP 03
Fast Delivery
We build, test and deliver to your schedule, when and wherever it suits you. No surprises.
Ready to Start Your Next Project?
Let's Get to Work
Contact us
Tell us what you're building and we'll get back to you within 24 hours.
We are happy to sign NDAs before any discussions take place
Direct line to our engineering team, not a sales person
We move as fast as your programme demands
WORKING WITH THE BEST
Let's Get to Work
Contact us
Tell us what you're building and we'll get back to you within 24 hours.
We are happy to sign NDAs before any discussions take place
Direct line to our engineering team, not a sales person
We move as fast as your programme demands
WORKING WITH THE BEST IN HARDWARE
Contact us
Let's Get to Work
Tell us what you're building and we'll get back to you within 24 hours.
We are happy to sign NDAs before any discussions take place
Direct line to our engineering team, not a sales person
We move as fast as your programme demands
WORKING WITH THE BEST IN HARDWARE
© 2026 MILLBROOK ELECTRONICS